PRODUCTS

  • V Type Suction Blast Spay Gun Kit

V Type Suction Blast Spay Gun Kit

MAELEZO MAFUPI

Type V blasting gun directs a high-speed mixture of air and abrasive to quickly remove corrosion, coatings, heat treatment residue or other substances. ...


  • Components: Air jet, nozzle insert, nozzle sleeve, flange nut
  • Abrasive inlet size: 19mm/25mm

maelezo


undefined





简述.jpg


Suction Sand Blasting Gun, designed for fast efficient sand blasting, liquid or air cleaning of parts and surfaces, is a king of powerful tool for removing corrosion, mill scale, old paint, heat treatment residue, carbon buildup, tool marks, burrs and many other materials. It’s also widely used in the making of frosted glass in the factory.


Suitable Applications

1.Works with most recyclable blast media – steel grit and shot, silicon carbide, garnet, aluminum oxide, glass bead, and ceramics 

2.The removal of paint, rust, scale, and carbon, etc.


V Type Suction Blast Spay Gun Kit

Type V blasting gun directs a high-speed mixture of air and abrasive to quickly remove corrosion, coatings, heat treatment residue or other substances.



undefined


Novel Features

1.The gun keeps the air jet and blast nozzle precisely aligned to maximize blast efficiency and minimize gun-body wear 

2. A knurled nut at the gun outlet allows the operator to change nozzles without tools   

3. Adjustable bracket allows gun fixture in all possible blast directions  

4. Accepts a variety of nozzles and extensions such as boron carbide/silicon carbide /tungsten carbide/ceramics nozzle inserts, so the operator can select the best nozzle size and nozzle composition for the application  

5. Gun components such as air jet, nozzle insert, nozzle sleeve, and flange nut can be replaced separately to save costs


Operation:

1.With all related equipment correctly assembled and tested, the operator points the nozzle at the surface to be cleaned and presses the remote control handle to begin blasting.

2.The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly. 

3.The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.


图片展示.jpg


undefined                                    




undefined


1. Je, wewe ni kampuni ya biashara au mtengenezaji?

Sisi ni kiwanda, hasa bidhaa tungsten CARBIDE, boroni CARBIDE, na silicon bidhaa CARBIDE. Na pia tunafanya biashara kwa viambajengo vinavyohusiana kwa mahitaji ya wateja.

2. Tunawezaje kuhakikisha ubora?

Daima sampuli ya kabla ya uzalishaji kabla ya uzalishaji wa wingi; Ukaguzi wa mwisho kila wakati kabla ya usafirishaji

3. Kwa nini unapaswa kununua kutoka kwetu, si kutoka kwa wasambazaji wengine?

Uzoefu tajiri juu ya ubora wa bidhaa na usafirishaji wa ISO, bei nzuri na utoaji wa haraka wa wigo mpana wa uzalishaji kwa hiari; kuokoa gharama, kuokoa nishati, kuokoa muda; pata bidhaa za hali ya juu, pata fursa zaidi ya biashara, shinda soko!

4. Muda wako wa kujifungua ni wa muda gani?

Kwa ujumla, ni siku 3-5 ikiwa bidhaa ziko kwenye hisa; au ni siku 15-25 ikiwa bidhaa hazipo, kulingana na wingi wa agizo.

5. Je, unatoa sampuli? Je, ni bure au ya ziada?

Kwa ujumla, hatutoi sampuli zisizolipishwa. Lakini tunaweza kutoa gharama za sampuli kutoka kwa maagizo yako mengi.

6. Sheria na masharti yako ya malipo ni yapi?

Malipo Chini ya au sawa na 1000USD, 100% mapema. Malipo Ni Kubwa kuliko au sawa na 1000USD, 30% T/T mapema, salio kabla ya usafirishaji. Tunakubali T/T, L/C, Alipay, PayPal, Western Union WeChat, na kadhalika.


TUTUMIE BARUA
Tafadhali tuma ujumbe na tutakujibu!