ABS sandblast helmet with breathing hose

The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.

BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:

1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.

2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.

3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.

4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.

5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.

6. Standard: EN397:1995+A1:2000

HY-02A

For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.

1. Je, wewe ni kampuni ya biashara au mtengenezaji?

Sisi ni kiwanda, hasa bidhaa tungsten CARBIDE, boroni CARBIDE, na silicon bidhaa CARBIDE. Na pia tunafanya biashara kwa viambajengo vinavyohusiana kwa mahitaji ya wateja.

2. Tunawezaje kuhakikisha ubora?

Daima sampuli ya kabla ya uzalishaji kabla ya uzalishaji wa wingi; Ukaguzi wa mwisho kila wakati kabla ya usafirishaji

3. Kwa nini unapaswa kununua kutoka kwetu, si kutoka kwa wasambazaji wengine?

Uzoefu tajiri juu ya ubora wa bidhaa na usafirishaji wa ISO, bei nzuri na utoaji wa haraka wa wigo mpana wa uzalishaji kwa hiari; kuokoa gharama, kuokoa nishati, kuokoa muda; pata bidhaa za hali ya juu, pata fursa zaidi ya biashara, shinda soko!

4. Muda wako wa kujifungua ni wa muda gani?

Kwa ujumla, ni siku 3-5 ikiwa bidhaa ziko kwenye hisa; au ni siku 15-25 ikiwa bidhaa hazipo, kulingana na wingi wa agizo.

5. Je, unatoa sampuli? Je, ni bure au ya ziada?

Kwa ujumla, hatutoi sampuli zisizolipishwa. Lakini tunaweza kutoa gharama za sampuli kutoka kwa maagizo yako mengi.

6. Sheria na masharti yako ya malipo ni yapi?

Malipo Chini ya au sawa na 1000USD, 100% mapema. Malipo Ni Kubwa kuliko au sawa na 1000USD, 30% T/T mapema, salio kabla ya usafirishaji. Tunakubali T/T, L/C, Alipay, PayPal, Western Union WeChat, na kadhalika.