ABS sandblast helmet with breathing hose
deskribapena
ABS sandblast helmet with breathing hose
The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.
BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:
1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.
2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.
3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.
4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.
5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.
6. Standard: EN397:1995+A1:2000
HY-02A
For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.
1. Merkataritza-enpresa edo fabrikatzailea al zara?
Fabrika bat gara, batez ere tungsteno-karburoa, boro-karburoa eta silizio-karburoa produktuak. Eta erlazionatutako osagarrien merkataritza ere egiten dugu bezeroen eskakizunen arabera.
2. Nola berma dezakegu kalitatea?
Beti aurre-ekoizpen lagin bat masa-ekoizpenaren aurretik; Beti azken Ikuskapena bidali aurretik
3. Zergatik erosi behar zenituzke guri, ez beste hornitzaile batzuei?
Esperientzia aberatsa produktuan eta esportatzen ISO kalitatea, prezio ona eta entrega azkarra ekoizpen esparru zabala aukeran; aurreztu kostuak, aurreztu energia, aurreztu denbora; lortu kalitate handiko produktuak, irabazi negozio aukera gehiago, irabazi merkatua!
4. Zenbat denbora da entregatzeko epea?
Oro har, 3 ~ 5 egunekoa da salgaiak stockean badaude; edo 15-25 egunekoa da salgaiak stockean ez badaude, eskaera kopuruaren arabera.
5. Laginak ematen al dituzu? Doakoa ala gehigarria da?
Orokorrean, ez ditugu doako laginak eskaintzen. Baina lagin-kostuak kendu ditzakegu zure eskaera handietatik.
6. Zein da zure ordainketa-baldintzak eta metodoa?
Ordainketa 1000 USD baino txikiagoa edo berdina, % 100 aldez aurretik. Ordainketa 1000USD baino handiagoa edo berdina, % 30 T/T aldez aurretik, saldoa bidali aurretik. T/T, L/C, Alipay, PayPal, Western Union WeChat eta abar onartzen ditugu.