Angle Blast Nozzles are specially designed sandblasting nozzles that direct abrasive media sideways instead of straight ahead. Available with 45°, 90°, or 135° outlets, they provide access to corners, behind flanges, inside beams, and other confined areas that straight nozzles cannot reach.

The internal liner is made of tungsten carbide (TC) – an extremely wear-resistant material that withstands continuous abrasive impact. An aluminum jacket protects against ricochet damage and extends service life.

Models include single, double, or triple outlet bores: single bore delivers concentrated impact for weld prep and precision work; double and triple bores expand coverage for faster cleaning on larger surfaces.

This design ensures consistent abrasive contact in confined and irregular spaces, making Angle Blast Nozzles essential for structural steel, oil & gas, marine, and industrial maintenance projects.

Two thread families available:

Coarse Thread – 2"-4 1/2 U.N.C. With Al Jacket (45°/90°, 1/2/3 outlets)

Fine Thread – 1-1/4" N.P.S.M. With Al Jacket (45°/90°, 1/2/3 outlets)

Each available with 1, 2, or 3 outlets to balance impact vs. coverage.

Ideal for blasting recesses, pipe internals, behind angles, lattices etc.

45°, 90°, or 135° angle：Choose 45° for corners & weld seams, 90° for behind profiles & internal flanges, 135° for extreme reverse or deep cavities.

TC liner: TC for long wear life, higher hardness under extreme abrasion.

Aluminum jacket: Lightweight, corrosion-resistant, protects the liner from external impact.

Two thread standards: Coarse & Fine.

1/2/3 outlet bores: Multi-bore configurations expand coverage and increase productivity during cleaning operations.

Reach tight corners and edges: Straight nozzles cannot bend into inside corners of H-beams or angle irons. Angle nozzles (45°, 90°, or 135°) direct abrasive precisely into these tight areas, eliminating unblasted spots.

Clean behind flanges and brackets: The back sides of flanges and stiffeners are blind spots for straight nozzles. A 90° or 135° angle nozzle blasts sideways to clean both sides of rust and coating in one pass.

Access internal steel profiles: Box columns and hollow sections need internal cleaning. Insert an angle nozzle through the opening to blast sideways onto inner walls – something straight nozzles cannot do.

Improve weld seam preparation: Weld toes often have undercuts and oxidation. A 45° angled blast directly impacts the weld toe, creating a clean surface for better coating adhesion.

Reduce time spent repositioning hoses: Contractors often select Angle Blast Nozzles for structural steel and pipeline maintenance tasks.

Structural steel corner blasting: A 45° angle nozzle directs abrasive deep into the inside corner radius of H-beams and I-beams, removing mill scale and rust completely.

Internal beam cleaning: Insert an angle nozzle through access holes or open ends to blast sideways onto top, bottom, and side walls of beam interiors in one operation.

Oil & gas flange maintenance: A 90° or 135° angle nozzle precisely blasts the flange face and ring groove from a parallel or steep orientation, avoiding damage to the sealing surface.

Tank and vessel surface preparation: Angle nozzles (45°, 90°, or 135°) navigate around stiffener rings and nozzles to clean inside corners and behind stiffeners, ensuring full lining coverage.

Marine hull edge cleaning: A 45° angle nozzle delivers high-impact abrasive to hull edges, stiffener brackets, and welds, removing rust, old coating, and marine growth.

Industrial refurbishment work: Clean behind brackets, inside C-channels, and around bolt holes – areas that straight blast streams miss – reducing hand tool touch-up.

Weld joint surface preparation: The angled discharge pattern ensures consistent abrasive contact in confined and irregular spaces.

1.您是貿易公司還是製造商？

我們是一家工廠，主要生產碳化鎢、碳化硼和碳化矽產品。我們還根據客戶的要求對相關配件進行交易。

2.我們如何保證質量？

在批量生產之前始終是預生產樣品；發貨前始終進行最終檢查

3. 為什麼要從我們這裡購買，而不是從其他供應商那裡購買？

豐富的產品和出口經驗ISO質量，優惠的價格和快速的交貨廣泛的生產範圍可供選擇；節省成本、節省能源、節省時間；獲得優質產品，獲得更多商機，贏得市場！

4. 你們的交貨時間是多久？

一般有貨3~5天；或者如果貨物沒有庫存，則為 15-25 天，具體取決於訂單數量。

5.你們提供樣品嗎？它是免費的還是額外的？

一般來說，我們不提供免費樣品。但我們可以從您的批量訂單中扣除樣品費用。

6. 你們的付款條件和方法是什麼？

付款小於等於1000USD，100%預付。付款大於或等於 1000 美元，預付 30% T/T，發貨前餘額。我們接受 T/T、L/C、支付寶、PayPal、西聯微信等。