ABS sandblast helmet with breathing hose

The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.

BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:

1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.

2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.

3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.

4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.

5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.

6. Standard: EN397:1995+A1:2000

HY-02A

For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.

1. Ikaw ba ay isang kumpanya ng kalakalan o tagagawa?

Kami ay isang pabrika, pangunahing produkto ng tungsten carbide, boron carbide, at mga produktong silicon carbide. At nakikipagkalakalan din kami sa mga kaugnay na accessaries ayon sa mga kinakailangan ng mga customer.

2. Paano natin masisiguro ang kalidad?

Palaging isang pre-production sample bago ang mass production; Laging panghuling Inspeksyon bago ipadala

3. Bakit ka dapat bumili sa amin, hindi sa ibang mga supplier?

Mayaman na karanasan sa produkto at pag-export ng kalidad ngISO, magandang presyo at mabilis na paghahatid malawak na saklaw ng produksyon para sa opsyonal; makatipid ng gastos, makatipid ng enerhiya, makatipid ng oras; makakuha ng mga de-kalidad na produkto, makakuha ng mas maraming pagkakataon sa negosyo, manalo sa merkado!

4. Gaano katagal ang iyong oras ng paghahatid?

Sa pangkalahatan, ito ay 3~5 araw kung ang mga kalakal ay nasa stock; o ito ay 15-25 araw kung ang mga kalakal ay walang stock, depende sa dami ng order.

5. Nagbibigay ka ba ng mga sample? Libre ba ito o dagdag?

Sa pangkalahatan, hindi kami nagbibigay ng mga libreng sample. Ngunit maaari naming ibawas ang mga sample na gastos mula sa iyong maramihang mga order.

6. Ano ang iyong mga tuntunin at paraan ng pagbabayad?

Pagbabayad na Mas mababa sa o katumbas ng 1000USD, 100% nang maaga. Pagbabayad na Higit sa o katumbas ng 1000USD, 30% T/T nang maaga, balanse bago ipadala. Tinatanggap namin ang T/T, L/C, Alipay, PayPal, Western Union WeChat, at iba pa.