ABS sandblast helmet with breathing hose

The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.

BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:

1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.

2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.

3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.

4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.

5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.

6. Standard: EN397:1995+A1:2000

HY-02A

For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.

1. Ma tahay shirkad ganacsi ama soo saaraha?

Waxaan nahay warshad, inta badan alaabo tungsten carbide, boron carbide, iyo alaabada carbide silicon. Waxaan sidoo kale ka ganacsannaa agabyada la xidhiidha shuruudaha macaamiisha.

2. Sideen u dammaanad qaadi karnaa tayada?

Had iyo jeer muunad wax-soo-saar hore ka hor wax-soo-saarka guud; Had iyo jeer Kormeerka ugu dambeeya ka hor inta aan la dhoofin

3. Maxaad nooga iibsanaysaa alaab-qeybiyeyaal kale?

Khibrad qani ah oo ku saabsan badeecada iyo dhoofinta tayada ISO, qiimaha wanaagsan iyo gaarsiinta degdega ah baaxadda wax soo saarka ballaaran ee ikhtiyaari ah; kaydi kharashka, kaydi tamarta, kaydi wakhtiga; hel alaab tayo sare leh, hel fursad ganacsi oo badan, ku guulaysato suuqa!

4. Intee ayay tahay wakhtiga dhalmada?

Guud ahaan, waa 3 ~ 5 maalmood haddii alaabtu ay ku jiraan kaydka; ama waa 15-25 maalmood haddii alaabtu aysan ku jirin kaydka, iyadoo ku xiran hadba sida loo dalbado.

5. Ma bixisaa muunado? Ma bilaash baa mise waa dheeraad?

Guud ahaan, ma bixinno muunado bilaash ah. Laakiin waxaan ka jari karnaa kharashyada muunada amaradaada badan.

6. Waa maxay shuruudaha lacag bixinta?

Lacag-bixinta Wax ka yar ama la mid ah 1000USD, 100% ka hor. Lacag bixinta Ka weyn ama la mid ah 1000USD, 30% T/T ka hor, dheelitirka ka hor inta aan la dhoofin. Waxaan aqbalnaa T/T, L/C, Alipay, PayPal, Western Union WeChat, iyo wixii la mid ah.