ABS sandblast helmet with breathing hose
توضیحات
ABS sandblast helmet with breathing hose
The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.
BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:
1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.
2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.
3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.
4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.
5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.
6. Standard: EN397:1995+A1:2000
HY-02A
For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.
1. ایا تاسو سوداګریز شرکت یا تولید کونکی یاست؟
موږ فابریکه یو، په عمده توګه د محصول ټنګسټن کاربایډ، بوران کاربایډ، او سیلیکون کاربایډ محصولات. او موږ د پیرودونکو اړتیاو سره سم د اړوندو لوازمو سوداګرۍ هم کوو.
2. موږ څنګه کولی شو کیفیت تضمین کړو؟
د ډله ایز تولید دمخه تل د تولید دمخه نمونه؛ د بار وړلو دمخه تل وروستی تفتیش
3. ولې تاسو باید له موږ څخه واخلئ، نه د نورو عرضه کونکو څخه؟
د محصول او صادرولو ISO کیفیت کې بډایه تجربه، ښه قیمت او ګړندي تحویلي د اختیاري لپاره پراخه تولید ساحه؛ لګښت خوندي کړئ، انرژي خوندي کړئ، وخت خوندي کړئ؛ د لوړ کیفیت محصولات ترلاسه کړئ ، د سوداګرۍ ډیر فرصت ترلاسه کړئ ، بازار وګټئ!
4. ستاسو د سپارلو وخت څومره دی؟
عموما، دا 3 ~ 5 ورځې دي که چیرې توکي په ذخیره کې وي؛ یا دا 15-25 ورځې دي که چیرې توکي په سټاک کې نه وي ، د امر مقدار پورې اړه لري.
5. ایا تاسو نمونې چمتو کوئ؟ ایا دا وړیا یا اضافي دی؟
عموما، موږ وړیا نمونې نه وړاندې کوو. مګر موږ کولی شو ستاسو د لوی امرونو څخه د نمونې لګښتونه کم کړو.
6. ستاسو د تادیې شرایط او طریقه څه ده؟
تادیه د 1000USD څخه کم یا مساوي، 100٪ دمخه. تادیه د 1000USD څخه لوی یا مساوي ، 30٪ T/T دمخه ، د بار وړلو دمخه توازن. موږ T/T، L/C، Alipay، PayPal، ویسټرن یونین WeChat، او داسې نور منو.