ABS sandblast helmet with breathing hose

The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.

BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:

1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.

2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.

3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.

4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.

5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.

6. Standard: EN397:1995+A1:2000

HY-02A

For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.

1. Adakah anda syarikat perdagangan atau pengilang?

Kami adalah sebuah kilang, terutamanya produk tungsten karbida, boron karbida, dan produk silikon karbida. Dan kami juga melakukan perdagangan pada alat tambahan yang berkaitan mengikut keperluan pelanggan.

2. Bagaimana kami boleh menjamin kualiti?

Sentiasa sampel pra-pengeluaran sebelum pengeluaran besar-besaran; Sentiasa Pemeriksaan akhir sebelum penghantaran

3. Mengapa anda perlu membeli daripada kami, bukan daripada pembekal lain?

Pengalaman yang kaya pada produk dan mengeksport kualiti ISO, harga yang baik dan penghantaran cepat skop pengeluaran yang luas untuk pilihan; menjimatkan kos, menjimatkan tenaga, menjimatkan masa; dapatkan produk berkualiti tinggi, dapatkan lebih banyak peluang perniagaan, menangi pasaran!

4. Berapa lama masa penghantaran anda?

Secara amnya, ia adalah 3 ~ 5 hari jika barang itu ada dalam stok; atau 15-25 hari jika barang tidak ada dalam stok, bergantung pada kuantiti pesanan.

5. Adakah anda menyediakan sampel? Adakah ia percuma atau tambahan?

Secara amnya, kami tidak menyediakan sampel percuma. Tetapi kami boleh menolak kos sampel daripada pesanan pukal anda.

6. Apakah terma dan kaedah pembayaran anda?

Pembayaran Kurang daripada atau sama dengan 1000USD, 100% lebih awal. Pembayaran Lebih daripada atau sama dengan 1000USD, 30% T/T terlebih dahulu, baki sebelum penghantaran. Kami menerima T/T, L/C, Alipay, PayPal, Western Union WeChat dan sebagainya.