ABS sandblast helmet with breathing hose

The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.

BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:

1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.

2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.

3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.

4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.

5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.

6. Standard: EN397:1995+A1:2000

HY-02A

For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.

1. He kamupene hokohoko koe, he kaihanga ranei?

He wheketere matou, ko te nuinga o nga hua tungsten carbide, boron carbide, me nga hua carbide silicon. A ka hokohoko ano matou i runga i nga taputapu taapiri mo ia whakaritenga a nga kaihoko.

2. Me pehea e taea ai e matou te tohu te kounga?

I nga wa katoa he tauira i mua i te whakaputa i mua i te hanga papatipu; I nga wa katoa te tirotiro whakamutunga i mua i te tuku

3. He aha koe me hoko mai i a maatau, kaua mai i etahi atu kaiwhakarato?

He wheako nui mo te hua me te kaweake i te koungaISO, te utu pai me te tuku tere te whanui whakaputa whanui mo te kowhiringa; whakaora utu, whakaora pūngao, whakaora wa; whiwhi hua-kounga teitei, whai waahi pakihi, wikitoria te maakete!

4. Kia pehea te roa o to wa tuku?

Ko te tikanga, ko te 3 ~ 5 nga ra mena kei roto nga taonga; he 15-25 ranei nga ra ki te kore nga taonga i roto i nga taonga, i runga i te rahinga ota.

5. Kei te whakarato koe i nga tauira? He kore utu, he taapiri ranei?

Ko te tikanga, kaore matou e whakarato tauira kore utu. Engari ka taea e matou te tango i nga utu tauira mai i o ota nui.

6. He aha o tikanga utu me to tikanga?

Utu iti iho i te rite ranei ki te 1000USD, 100% i mua. Te utu nui atu i te rite ranei ki te 1000USD, 30% T / T i mua, toenga i mua i te tuku. Ka whakaaetia e matou te T / T, L / C, Alipay, PayPal, Western Union WeChat, me etahi atu.