ABS sandblast helmet with breathing hose
ລາຍລະອຽດ
ABS sandblast helmet with breathing hose
The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.
BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:
1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.
2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.
3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.
4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.
5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.
6. Standard: EN397:1995+A1:2000
HY-02A
For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.
1. ທ່ານເປັນບໍລິສັດການຄ້າຫຼືຜູ້ຜະລິດບໍ?
ພວກເຮົາເປັນໂຮງງານຜະລິດ, ສ່ວນໃຫຍ່ແມ່ນຜະລິດຕະພັນ tungsten carbide, boron carbide, ແລະຜະລິດຕະພັນ silicon carbide. ແລະພວກເຮົາຍັງເຮັດການຄ້າກ່ຽວກັບອຸປະກອນເສີມທີ່ກ່ຽວຂ້ອງຕາມຄວາມຕ້ອງການຂອງລູກຄ້າ.
2. ພວກເຮົາສາມາດຮັບປະກັນຄຸນນະພາບໄດ້ແນວໃດ?
ສະເຫມີເປັນຕົວຢ່າງການຜະລິດກ່ອນການຜະລິດມະຫາຊົນ; ກວດກາຂັ້ນສຸດທ້າຍສະເໝີກ່ອນການຂົນສົ່ງ
3. ເປັນຫຍັງທ່ານຄວນຊື້ຈາກພວກເຮົາ, ບໍ່ແມ່ນຈາກຜູ້ສະຫນອງອື່ນໆ?
ປະສົບການທີ່ອຸດົມສົມບູນກ່ຽວກັບຜະລິດຕະພັນແລະການສົ່ງອອກຄຸນນະພາບ ISO, ລາຄາທີ່ດີແລະການຈັດສົ່ງໄວຂອບເຂດການຜະລິດກວ້າງສໍາລັບທາງເລືອກ; ປະຫຍັດຄ່າໃຊ້ຈ່າຍ, ປະຫຍັດພະລັງງານ, ປະຫຍັດເວລາ; ໄດ້ຮັບຜະລິດຕະພັນທີ່ມີຄຸນນະພາບສູງ, ໄດ້ຮັບໂອກາດທາງທຸລະກິດຫຼາຍຂຶ້ນ, ຊະນະຕະຫຼາດ!
4. ເວລາການຈັດສົ່ງຂອງທ່ານດົນປານໃດ?
ໂດຍທົ່ວໄປ, ມັນແມ່ນ 3 ~ 5 ມື້ຖ້າສິນຄ້າຢູ່ໃນຫຼັກຊັບ; ຫຼືມັນແມ່ນ 15-25 ມື້ຖ້າສິນຄ້າບໍ່ມີຢູ່ໃນຫຼັກຊັບ, ອີງຕາມຈໍານວນການສັ່ງຊື້.
5. ເຈົ້າໃຫ້ຕົວຢ່າງບໍ? ມັນບໍ່ເສຍຄ່າຫຼືພິເສດບໍ?
ໂດຍທົ່ວໄປແລ້ວ, ພວກເຮົາບໍ່ໃຫ້ຕົວຢ່າງຟຣີ. ແຕ່ພວກເຮົາສາມາດຫັກຄ່າໃຊ້ຈ່າຍຕົວຢ່າງຈາກຄໍາສັ່ງຫຼາຍຂອງທ່ານ.
6. ເງື່ອນໄຂແລະວິທີການຊໍາລະຂອງທ່ານແມ່ນຫຍັງ?
ການຈ່າຍເງິນໜ້ອຍກວ່າ ຫຼືເທົ່າກັບ 1000USD, 100% ລ່ວງໜ້າ. ການຈ່າຍເງິນຫຼາຍກວ່າຫຼືເທົ່າກັບ 1000USD, 30% T / T ລ່ວງຫນ້າ, ຍອດເງິນກ່ອນການຂົນສົ່ງ. ພວກເຮົາຍອມຮັບ T / T, L / C, Alipay, PayPal, Western Union WeChat, ແລະອື່ນໆ.