ABS sandblast helmet with breathing hose
նկարագրությունը
ABS sandblast helmet with breathing hose
The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.
BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:
1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.
2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.
3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.
4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.
5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.
6. Standard: EN397:1995+A1:2000
HY-02A
For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.
1. Դուք առևտրային ընկերություն կամ արտադրող եք:
Մենք գործարան ենք, հիմնականում վոլֆրամի կարբիդի, բորի կարբիդի և սիլիցիումի կարբիդի արտադրանք: Եվ մենք նաև առևտուր ենք անում համապատասխան պարագաներով` ըստ հաճախորդների պահանջների:
2. Ինչպե՞ս կարող ենք երաշխավորել որակը:
Միշտ նախնական արտադրության նմուշ՝ զանգվածային արտադրությունից առաջ; Միշտ վերջնական ստուգում առաքումից առաջ
3. Ինչու՞ պետք է գնեք մեզանից, այլ ոչ թե այլ մատակարարներից:
Արտադրանքի և ISO որակի արտահանման հարուստ փորձ, լավ գին և արագ առաքում, ընտրովի արտադրության լայն շրջանակ; խնայել ծախսերը, խնայել էներգիան, խնայել ժամանակը; ձեռք բերեք բարձրորակ ապրանքներ, ձեռք բերեք ավելի շատ բիզնես հնարավորություններ, շահեք շուկան:
4. Որքա՞ն է ձեր առաքման ժամանակը:
Ընդհանուր առմամբ, դա 3-5 օր է, եթե ապրանքը պահեստում է. կամ 15-25 օր է, եթե ապրանքը պահեստում չէ՝ կախված պատվերի քանակից։
5. Դուք տալիս եք նմուշներ: Դա անվճար է, թե հավելյալ:
Ընդհանրապես, մենք անվճար նմուշներ չենք տրամադրում: Բայց մենք կարող ենք նվազեցնել նմուշի ծախսերը ձեր մեծածախ պատվերներից:
6. Որո՞նք են ձեր վճարման պայմանները և եղանակը:
Վճարում 1000 ԱՄՆ դոլարից պակաս կամ հավասար, 100% կանխավճար: 1000USD-ից ավելի կամ հավասար վճարում, 30% T/T կանխավճար, մնացորդ մինչև առաքումը: Մենք ընդունում ենք T/T, L/C, Alipay, PayPal, Western Union WeChat և այլն: