ABS sandblast helmet with breathing hose
kirjeldus
ABS sandblast helmet with breathing hose
The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.
BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:
1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.
2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.
3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.
4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.
5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.
6. Standard: EN397:1995+A1:2000
HY-02A
For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.
1. Kas olete kaubandusettevõte või tootja?
Oleme tehas, mis toodab peamiselt volframkarbiidi, boorkarbiidi ja ränikarbiidi tooteid. Ja me kaupleme ka seotud tarvikutega vastavalt klientide vajadustele.
2. Kuidas saame tagada kvaliteedi?
Alati tootmiseelne proov enne masstootmist; Alati lõplik ülevaatus enne saatmist
3. Miks peaksite ostma meilt, mitte teistelt tarnijatelt?
Rikkalik kogemus toote ja ISO-kvaliteedi, hea hinna ja kiire tarnega, laia tootmismahu ja valikulise ekspordi osas; säästa kulusid, säästa energiat, säästa aega; hankige kvaliteetseid tooteid, saate rohkem ärivõimalusi, võitke turgu!
4. Kui pikk on teie tarneaeg?
Üldiselt on see 3–5 päeva, kui kaup on laos; või 15-25 päeva, kui kaupa pole laos, olenevalt tellimuse kogusest.
5. Kas pakute näidiseid? Kas see on tasuta või lisatasu?
Üldiselt me tasuta näidiseid ei paku. Kuid me saame teie hulgitellimustest näidiskulud maha arvata.
6. Millised on teie maksetingimused ja -viis?
Makse alla 1000 USD või sellega võrdne, 100% ettemaks. Makse 1000 USD või suurem, 30% T / T ette, saldo enne saatmist. Aktsepteerime T/T, L/C, Alipay, PayPali, Western Union WeChati ja nii edasi.