ABS sandblast helmet with breathing hose
opis
ABS sandblast helmet with breathing hose
The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.
BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:
1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.
2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.
3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.
4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.
5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.
6. Standard: EN397:1995+A1:2000
HY-02A
For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.
1. Da li ste trgovačka kompanija ili proizvođač?
Mi smo fabrika, uglavnom proizvodi volfram karbid, bor karbid i proizvodi od silicijum karbida. Takođe vršimo trgovinu povezanim dodacima prema zahtevima kupaca.
2. Kako možemo garantovati kvalitet?
Uvijek uzorak prije proizvodnje prije masovne proizvodnje; Uvijek konačna inspekcija prije otpreme
3. Zašto biste kupovali od nas, a ne od drugih dobavljača?
Bogato iskustvo o kvaliteti proizvoda i izvozu ISO, dobra cijena i brza isporuka širok opseg proizvodnje za opciono; uštedite troškove, uštedite energiju, uštedite vrijeme; dobiti visokokvalitetne proizvode, dobiti više poslovnih prilika, osvojiti tržište!
4. Koliko dugo je vaše vrijeme isporuke?
Generalno, to je 3~5 dana ako je roba na zalihama; ili je 15-25 dana ako roba nije na lageru, ovisno o količini narudžbe.
5. Da li dajete uzorke? Je li besplatno ili dodatno?
Općenito, ne obezbjeđujemo besplatne uzorke. Ali možemo odbiti troškove uzorka od vaših masovnih narudžbi.
6. Koji su vaši uslovi i način plaćanja?
Plaćanje manje od ili jednako 1000USD, 100% unaprijed. Plaćanje veće ili jednako 1000 USD, 30% T/T unaprijed, stanje prije isporuke. Prihvatamo T/T, L/C, Alipay, PayPal, Western Union WeChat i tako dalje.