ABS sandblast helmet with breathing hose

The helmet commonly referred to as a sandblasting helmet is part of any standard protective equipment (PE) for operators because it performs several functions at the same time. It not only protects against blast media rebound but also supplies breathing air to the operator through a separate breathing airline. Therefore, it is even more important for us to place special importance on quality and to provide a safe productbecause the helmet is more than a simple blasting mask.

BSTEC blasting helmet is made in non-toxic, tasteless, and high-strength ABS material formed at one time, with the characteristics as below:

1. The air inlet is equipped with a noise-canceling device to avoid noise caused by strong airflow entering.

2. It is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame, so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head.

3. The overall design of comfortable ventilation effect is scientific and reasonable, the top is equipped with a safety helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed, easy to disassemble and disassemble.

4. The lens of the window can be replaced directly without taking off the garment. The neck is equipped with an elastic seal for stronger tightness, and the front and the rear shawl are fastened, making it easy to wear.

5. It is designed to reduce fatigue, ensuring the abrasive blast helmet's weight is evenly distributed, balanced across the head and shoulders.

6. Standard: EN397:1995+A1:2000

HY-02A

For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm. Double side protective film shall be removed before use.

1. Is jy 'n handelsmaatskappy of vervaardiger?

Ons is 'n fabriek, hoofsaaklik produk wolframkarbied, boorkarbied, en silikonkarbied produkte. En ons doen ook handel oor verwante bykomstighede volgens kliënte se vereistes.

2. Hoe kan ons die kwaliteit waarborg?

Altyd 'n voorproduksiemonster voor massaproduksie; Altyd finale inspeksie voor versending

3. Hoekom moet jy by ons koop, nie by ander verskaffers nie?

Ryk ervaring op produk en uitvoer van ISO kwaliteit, goeie prys en vinnige aflewering wye produksie omvang vir opsioneel; bespaar koste, bespaar energie, bespaar tyd; kry produkte van hoë gehalte, kry meer sakegeleentheid, wen die mark!

4. Hoe lank is jou afleweringstyd?

Oor die algemeen is dit 3 ~ 5 dae as die goedere in voorraad is; of dit is 15-25 dae as die goedere nie in voorraad is nie, afhangende van bestelhoeveelheid.

5. Verskaf u monsters? Is dit gratis of ekstra?

Oor die algemeen verskaf ons nie gratis monsters nie. Maar ons kan monsterkoste van u grootmaatbestellings aftrek.

6. Wat is jou betalingsvoorwaardes en -metode?

Betaling Minder as of gelyk aan 1000USD, 100% vooruit. Betaling groter as of gelyk aan 1000USD, 30% T/T vooruit, balans voor versending. Ons aanvaar T/T, L/C, Alipay, PayPal, Western Union WeChat, ensovoorts.